How To: Disassemble and assemble the Witness Elite Limited gun

Disassemble and assemble the Witness Elite Limited gun

How to Disassemble and assemble the Witness Elite Limited gun

These two videos show you how to completely disassemble and reassemble all the parts in the frame. It'll also give you a little more insight into the internals of the EAA pistol. There are several hard learned tricks in these videos that will save you a lot of time.

Warning! This is not something you should attempt unless you have confidence in your technical skills. Watch the videos several times before attempting disassembly until you have a good understanding of what to do. Wear eye-protection!

Also, that being said, the EAA Witness Elite Limited handgun frame does not need to be disassembled to clean it. You can clean the inside of the frame simply by spraying it with brake cleaner to get all the dirt out. Follow up with a rag and re-lube using a light oil.

Before you do this, make sure you have all the tools needed:

1/16" Pin Punch
Very Small Flat-Tip Screwdriver
Gunsmith Hammer
Needle Nose Pliers
Cleaning Rag
Q-Tips
Light Gun Oil
Slide-Glide #1
Brake-Cleaner

Designed specifically for sport shooters competing in the IPSC limited class ,the Witness Elite "Limited" is one of the finest pistols ever produced by Tanfoglio. For nearly 20 years, the "Limited" has been the pistol of choice for many top shooters around the world.

(1) Part 1 of 2 - How to Disassemble and assemble the Witness Elite Limited gun, (2) Part 2 of 2 - How to Disassemble and assemble the Witness Elite Limited gun

Be the First to Comment

Share Your Thoughts

  • Hot
  • Latest